top of page


Photo-X EEG Conductive Paste for EEG, EMG, NCV/PSG Test

Application to use Photo-X EEG conductive paste, you will need the following materials:

  1. EEG electrodes

  2. EEG conductive paste

  3. Cotton swabs or gauze

  4. Water

Here are the steps to follow:

  1. Clean the scalp thoroughly with water and a mild shampoo to remove any oil or dirt that may interfere with the recording.

  2. Rinse the scalp thoroughly with water and dry it gently with a towel.

  3. Apply a small amount of EEG conductive paste to each electrode. The amount needed will depend on the size of the electrode and the thickness of the paste.

  4. Use a cotton swab or gauze to spread the paste evenly over the electrode.

  5. Place the electrodes on the scalp, being careful not to disturb the paste.

  6. Secure the electrodes in place with adhesive tape or elastic bands.

  7. Turn on the EEG machine and begin the recording.

  8. After the recording is complete, remove the electrodes and clean the scalp with water and a mild shampoo.

  9. Rinse the scalp thoroughly with water and dry it gently with a towel.

  10. Store the EEG conductive paste in a cool, dry place away from direct sunlight.

It is important to use EEG conductive paste correctly to ensure accurate and reliable EEG recordings. If you have any questions or concerns, consult with a medical professional or a qualified EEG technician.

Images clearly shows the quality of the product and performance will be felt while using this EEG Paste. Its Ready to survive high temperature also and its sticky nature doesn't slip off the electrode if used in appropriate amount

Our Photo-X EEG conductive paste is a High-quality solution that can help improve the conductivity and reduce the amount of noise in the readings, which can give more accurate and reliable results.

1. The Stability : Its Super Stable over any temperature, 
2.  Highly Conductive: A right balance of electrolyte solutions provides good conduction for EEG, EMG, NCV/PSG Test.

3. Medium Consistent: Our Paste has medium consistency not too runny and not too thick while holding the Electrode properly to its place.
4. Easy To Wash : After the test the there is no mess created as this is very easily washed off unlike clay b
ased pastes. 
5. Packaging: 
Photo-X EEG CONDUCTIVE PASTE 230 gms. comes with attractive and strong packaging:
3 Pcs. x 18 = 54 Pieces of 230 Gms. 

Photo-X EEG Conductive Paste for Ten20, EMG, NCV/PSG TEST
Photo-X EEG Conductive Gel is a Thick wax based formula
Photo-X Ultra Sound Gel and Cardio Gel for use in Sonography and physiography


Right consistency and viscosity of our Gels ensures that it spreads evenly over the skin and allows for clear and accurate imaging.

  1. High viscosity: Our gel has a high viscosity, which means it is thick and sticky. This allows it to stick to the skin and prevent air pockets from forming between the skin and the ultrasound probe, which could interfere with the transmission of ultrasound waves.

  2. Water-soluble: Our gel is water-soluble, which means it is easy to clean up and does not leave any residue on the skin or clothing. It can be easily wiped off with a damp cloth or washed off with water.

  3. Odorless: It is odorless

  4. Affordable: Photo-X gels are relatively inexpensive

  5. Non-irritating: Non-irritating and non-toxic, making it safe to use on the skin

  6. Packing Size:        Packing            Box qty.             MOQ

        1      250 ml Bottles      100 Pcs.         1000 Pcs.

        2           5 Liters Jar          4 Pcs.             60 Pcs.

        3        1 Liter Pouch        15 Pcs.          180 Pcs.


bottom of page